意大利diniargeo狄纳乔DGT603GD防爆称重仪表 DGT60称重大屏幕
Weight indicator/ repeater particularly suitable for use in hazardous environments, where it's necessary to view the weight from a distance at any angle. Usable in areas: ATEX II 3G Ex nR IIC T6 Gc X for gases ATEX II 3D Ex tc IIIC T85°C Dc IP68 X for dust. Fitted with a very bright 60mm LED matrix display and IP68 stainless steel case. CE-M approvable (OIML R-76 / EN 45501). | | | MAIN FEATURES |
| | Functional 5-key waterproof keypad. Large 6-digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd. IP68 stainless steel case complete of wall fixing bracket. Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS. Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use. Max. 800.000 displayable divisions viewable with internal resolution up to 3.000.000 points. Up to 8 signal linearisation points with DINITOOLS. A/D 24 bit sigma-delta 4-channel conversion, max.400 conv./sec. with automatic selection. Connectable with up to 8 analogue load cells with 350 Ohm input resistance. Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems. Power supply from 110-240 Vac. Available as Scale or as Repeater version.
|
| | | I/O SECTION |
| | RS232/C bidirectional port configurable for connection to printer, PC, or other external units. RS485 bidirectional port configurable for connection to PC, PLC, or other external units. PROFIBUS bidirectional port (DGT60PB3GD model). 2 MOSFET 150 mA 48 Vac / 150 mA 60 Vdc (NO) outputs, with configurable functions. 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min - 20 mA max, with configurable functions. 16-bit analogue output (DGT60AN3GD model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 300 Ohm; minimum applicable voltage resistance: 1 kohm.
TAKE NOTE: All the cables must be installed and protected according to the standards for electrical equipment.
|
| | | DGT60R REPEATER FUNCTIONS |
| | Version with specific program for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
FUNCTIONING MODES: - Multi-scale repeater (MASTER): function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales. - UNIVERSAL weight repeater: function which allows to repeat the weight of any scales, through the configuration of the input string.
|
|
Dimensions in mm.
|
|
| FUNCTIONS |
|
|
THROUGH KEYBOARD: Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by. SELECTABLE: High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with Alibi memory ALMEM option); Counting; In/Out Truck weighing; Hold e Peak. EXTERNAL INPUT: Simulation of key pressure; Keyboard lock. MOSFET OUTPUT: Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability. SERIAL PORTS: On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory. DGT60BC3GD and DGT60AN3GD models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol. THROUGH 16 bit ANALOGUE OUTPUT (DGT60AN3GD): Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).
|
Available versions
| Code | Description |
| DGT60BC3GD-1 | ATEX 3GD weight indicator with 60mm LED display. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T85°C Dc IP68 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |
| DGT60AN3GD-1 | ATEX 3GD weight indicator with 60mm LED display and analogue output. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T85°C Dc IP68 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |
| DGT60PB3GD-2 | ATEX 3GD weight indicator with 60mm LED display and Profibus. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T85°C Dc IP68 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |
| DGT60R3GD-1 | ATEX 3GD weight repeater with 60mm LED display. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T85°C Dc IP68 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT). |